Thumbnails for Example-3b - 13 collages: Plastering the inside of an out building.

The Landscape thumbnails

Example-3b : collage 2.1 of 13. I added timber to the rafters to create more depth for the insulation and to bring the new plasterboard level to the existing electrics.
collage 02.1 of 13
Example-3b : collage 2.2 of 13. Here I am placing insulation between the rafters.
collage 02.2 of 13
Example-3b : collage 2.3 of 13. Here you can see where one part of the ceiling is boarded ready for plastering and the other is yet to be insulated.
collage 02.3 of 13
Example-3b : collage 2.4 of 13. Here you get an appreciation of the plasterboard on the ceiling being situated at a level with the existing electrics.
collage 02.4 of 13
Example-3b : collage 3.1 of 13. In this image the straight edge is touching parts of the wall and not others – indicating how far out of level it was.
collage 03.1 of 13
Example-3b : collage 4.2 of 13. An illustration of the plasterboard strips I dot and dabbed to the wall to create a level surface on which to apply a the full plasterboards that would make up the walls new surface.
collage 04.2 of 13
Example-3b : collage 4.3 of 13. Another illustration of the plasterboard strips I dot and dabbed to the wall to create a level surface on which to apply a the full plasterboards that would make up the walls new surface.
collage 04.3 of 13
Example-3b : collage 5.1 of 13. This image shows where I placed different angled strips to incorporate the pitch off the wall.
collage 05.1 of 13
Example-3b : collage 5.2 of 13. This image illustrates securing the plasterboard skim to the sufficient array of strips.
collage 05.2 of 13
Example-3b : collage 6.2 of 13. Here you can see where the plasterboard coat has been added over the top of the strips. Keeping the walls as level as possible.
collage 06.2 of 13
Example-3b : collage 6.3 of 13. Again you can see where the plasterboard coat has been added over the top of the strips. This time on two of the walls.
collage 06.3 of 13
Example-3b : collage 6.4 of 13. Here you can another angle of where the plasterboard coat has been added over the top of the strips. Keeping the walls as level as possible.
collage 06.4 of 13
Example-3b : collage 11.1 of 13. Bonding over fibre taped joins in the ceiling to prevent cracking in the plaster work later down the line.
collage 11.1 of 13
Example-3b : collage 11.2 of 13. Bonding over fibre taped joins in the ceiling to prevent cracking in the plaster work later down the line.
collage 11.2 of 13
Go back to the top of the page

The Portrait thumbnails

Example-3b : collage 1 of 13 of plastering the inside of an out building.
collage 01 of 13
Example-3b : collage 4.1 of 13. An illustration of the plasterboard strips I dot and dabbed to the wall to create a level surface on which to apply a the full plasterboards that would make up the walls new surface.
collage 04.1 of 13
Example-3b : collage 6.1 of 13. Here you can see where the plasterboard coat has been added over the top of the strips. Keeping the walls as level as possible.
collage 06.1 of 13
Example-3b : collage 7.1 of 13. The smallest wall to the building being dot and dabbed.
collage 07.1 of 13
Example-3b : collage 7.2 of 13. The smallest wall to the building being dot and dabbed.
collage 07.2 of 13
Example-3b : collage 8.1 of 13. The discrepancy of the level of the smallest wall of the building.
collage 08.1 of 13
Example-3b : collage 8.2 of 13. The smallest wall of the building as flat as possible.
collage 08.2 of 13
Example-3b : collage 8.3 of 13. The smallest wall of the building dot and dabbed.
collage 08.3 of 13
Example-3b : collage 9.1 of 13. Because it was still slightly out of level I devil floated the centre wall.
collage 09.1 of 13
Example-3b : collage 9.2 of 13. Devil floating the centre wall.
collage 09.2 of 13
Example-3b : collage 9.3 of 13. Devil floating the centre wall.
collage 09.3 of 13
Example-3b : collage 10.1 of 13. Applying the first of two coats of multi finish plaster over the devil floated wall.
collage 10.1 of 13
Example-3b : collage 12.1 of 13. Preparing the timber frame work ready for a floating decked floor.
collage 12.1 of 13
Example-3b : collage 12.2 of 13. Laying damp proof course under the frame work for the floating decked floor.
collage 12.2 of 13
Example-3b : collage 12.3 of 13. The floated frame work ready for the decking slates that will make up the foor.
collage 12.3 of 13
Example-3b : collage 13.1 of 13. Progressing towards the finished raised floor.
collage 13.1 of 13
Example-3b : collage 13.2 of 13. Progressing towards the finished raised floor.
collage 13.2 of 13
Example-3b : collage 13.3 of 13. The finished raised floor.
collage 13.3 of 13
Example-3b : collage 13.4 of 13. The finished floated floor.
collage 13.4 of 13
Go back to the top of the page