Thumbnails for Example-4 - 24 depictions: Rendering over sandstone brickwork.

The Landscape and Square thumbnails

Example-4 : depiction 02.1 of 24. Scrapping the flakes off the sandstone brickwork. — depiction 02.1 of 24

Example-4 : depiction 02.4 of 24. Hosing down the sandstone brickwork. — depiction 02.4 of 24

Example-4 : depiction 03.1 of 24. This image depicts the application of Rendergrip to the sandstone wall. — depiction 03 of 24

Example-4 : depiction 06.1 of 24. The red patches indicate the higher points of the brickwork that weren't covered until the application of the second scratch coat. — depiction 06.1 of 24

Example-4 : depiction 07 of 24. The newly rendered area in this image depicts the span of meterage that was covered in this first area of the job. — depiction 07 of 24

Example-4 : depiction 12.1 of 24. Prior to building up scratch coats of render on the footings of the building. — depiction 12.1 of 24

Example-4 : depiction 12.2 of 24. Building up scratch coats of render on the footings of the building. — depiction 12.2 of 24

Example-4 : depiction 12.3 of 24. Building up scratch coats of render on the footings of the building. — depiction 12.3 of 24

Example-4 : depiction 13.1 of 24. building up the render to the footings of the building. — depiction 13.1 of 24

Example-4 : depiction 14.1 of 24. The second area of work for this job was also to the front of the site. — depiction 14.1 of 24

Example-4 : depiction 14.2 of 24. The second area of work for this job was also to the front of the site. — depiction 14.2 of 24

Example-4 : depiction 14.3 of 24. The second area of work for this job was also to the front of the site. — depiction 14.3 of 24

Example-4 : depiction 15 of 24. The third area of work for this job. — depiction 15 of 24

Example-4 : depiction 16.1 of 24. Numerous problems were unearthed by hacking off the render. — depiction 16.1 of 24

Example-4 : depiction 16.2 of 24. Numerous problems were unearthed by hacking off the render. — depiction 16.2 of 24

Go back to the top of the page

Example-4 : depiction 16.3 of 24. Numerous problems were unearthed by hacking off the render. — depiction 16.3 of 24

Example-4 : depiction 16.4 of 24. Numerous problems were unearthed by hacking off the render. — depiction 16.4 of 24

Example-4 : depiction 17.1 of 24. Sbr had just been applied to the area in this image. — depiction 17.1 of 24

Example-4 : depiction 17.2 of 24. Rendergrip has been applied to the area in this image. — depiction 17.2 of 24

Example-4 : depiction 17.3 of 24. Rendergrip has been applied to the area in this image. — depiction 17.3 of 24

Example-4 : depiction 18.1 of 24. A wooden lintel was reinforced with wire mesh prior to rendering so that the render mix would adhere to it. — depiction 18.1 of 24

Example-4 : depiction 19.1 of 24. Appropriate sized bricks and stone were found and cemented into the position of the largest holes. — depiction 19.1 of 24

Example-4 : depiction 21.1 of 24. The dubbed out area of the wall was scratched before the application of trowelled scratch coats. — depiction 21.1 of 24

Example-4 : depiction 21.2 of 24. The dubbed out area of the wall was scratched before the application of trowelled scratch coats. — depiction 21.2 of 24

Example-4 : depiction 21.3 of 24. The dubbed out area of the wall was scratched before the application of trowelled scratch coats. — depiction 21.3 of 24

Example-4 : depiction 22.1 of 24. The first scratch coat to the third area. — depiction 22.1 of 24

Example-4 : depiction 22.2 of 24. The second scratch coat to the third area. — depiction 22.2 of 24

Example-4 : depiction 23.1 of 24. A brushed stippling render finish. — depiction 23.1 of 24

Example-4 : depiction 23.2 of 24. A brushed stippling render finish. — depiction 23.2 of 24

Example-4 : depiction 24.1 of 24. The final coat of render. — depiction 24.1 of 24

Go back to the top of the page

The Portrait thumbnails

Example-4 : depiction 01.1 of 24 of rendering over sandstone brickwork. — depiction 01 of 24

Example-4 : depiction 02.2 of 24. Scrapping the flakes off the sandstone brickwork. — depiction 02.2 of 24

Example-4 : depiction 02.3 of 24. Hosing down the sandstone brickwork. — depiction 02.3 of 24

Example-4 : depiction 04.1 of 24. Trowelling a coat of render on to the sandstone wall. — depiction 04 of 24

Example-4 : depiction 06.2 of 24. The red patches indicate the higher points of the brickwork that weren't covered until the application of the second scratch coat. — depiction 06.2 of 24

Example-4 : depiction 09 of 24. This image captures how flat the application of the second coat of render was. — depiction 09 of 24

Example-4 : depiction 10.1 of 24. Using the small tool on the corner stones. — depiction 10.1 of 24

Example-4 : depiction 10.2 of 24. The angled corner stone. — depiction 10.2 of 24

Example-4 : depiction 10.3 of 24. The scratched corner stone. — depiction 10.3 of 24

Example-4 : depiction 11 of 24. A view of the final smooth coat and the flat render achieved. — depiction 11 of 24

Example-4 : depiction 13.2 of 24. You can see here how built up the render was on the footings of the building by the time I got to the finishing coat. — depiction 13.2 of 24

Example-4 : depiction 19.2 of 24. Appropriate sized bricks and stone were found and cemented into the position of the largest holes. — depiction 19.2 of 24

Example-4 : depiction 24.2 of 24. The final coat of render. — depiction 24.2 of 24

The video thumbnails

Example-4 : depiction 05.1 of 24. Applying the first scratch coat of render. — depiction 05 of 13

Example-4 : depiction 08 of 24. The art of rendering to a flat finish. — depiction 08 of 13

Example-4 : depiction 20 of 24. Dubbing out in slow motion. — depiction 20 of 13

Go back to the top of the page